MORSE 300Q140H60 103
MORSE
MORSE 300Q140H60 103
300Q140H60 103 PART NUMBER
XH1265
MFR
XH1265 Right Angle Worm Gear Speed Reducer - Single Reduction, 60:1 Ratio, 3.00 in Center Distance, C-Face Quill, 0.8750 in Input Size, Double Output Output, 143/145TC Frame
QTY QUOTEMORSE - MORSE 300Q140H60 103
Rugged Cast-Iron Housing Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
All Units Filled with Polyglycol Oil
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 3 in |
| Seal Material | Viton |
| Maximum Input Horsepower | 1.640 @ 1750 hp, rpm |
| Overhung Load Capacity | 2574 lbs |
| Ratio | 60:1 |
| Standard Base Kit | XH9000 |
| Output Direction | Double Output |
| Vertical Low Base Kit | XH9002 |
| Manufacturer Reducer Size | 300 |
| Vertical High Base Kit | XH9003 |
| Input Type | C-Face Quill |
| Vertical J Base Kit | XH9004 |
| Input Size | 0.875 in |
| Hollow Output Flange Kit | XH9001 |
| Output Type | Solid Shaft |
| Torque Arm Kit | XH9009 |
| Output Size | 1.1875 in |
| Riser Block Kit | XH9201 |
| Nema / Iec Frame Size | 143/145TC |
| Input Torque | 59.0600 @1750 input 1 HP in-lbs, rpm |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=20897 |
| Maximum Output Rpm | 29.17 rpm |
| Manufacturer Upc Number | 662288003113 |
| Maximum Output Torque | 29.17 @1750 input in-lbs, rpm |
| Weight | 69 lbs |
