MORSE 300Q140L10
MORSE
MORSE 300Q140L10
300Q140L10 PART NUMBER
XH1153
MFR
Raider Plus® XH1153 Right Angle Worm Gear Speed Reducer - Single Reduction, 10:1 Ratio, 3.00 in Center Distance, C-Face Quill, 0.6250 in Input Size, Left Hand Output, 143/145TC Frame
QTY QUOTEMORSE - MORSE 300Q140L10
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
All Units Filled with Polyglycol Oil
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 3 in |
| Seal Material | Viton |
| Maximum Input Horsepower | 6.150 @ 1750 rpm_x000D_ hp |
| Overhung Load Capacity | 2147 lbs |
| Standard Base Kit | XH9000 |
| Output Direction | Left Hand |
| Vertical Low Base Kit | XH9002 |
| Manufacturer Reducer Size | 300 |
| Vertical High Base Kit | XH9003 |
| Input Type | C-Face Quill |
| Vertical J Base Kit | XH9004 |
| Input Size | 0.625 in |
| Hollow Output Flange Kit | XH9001 |
| Output Type | Solid Shaft |
| Torque Arm Kit | XH9009 |
| Output Size | 1.25 in |
| Riser Block Kit | XH9201 |
| Nema / Iec Frame Size | 143/145TC |
| Input Torque | 221.4900 in-lbs @1750 input rpm 1 HP |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=4034 |
| Maximum Output Rpm | 175 rpm |
| Manufacturer Upc Number | 662000000000 |
| Maximum Output Torque | 175 in-lbs @1750 input rpm |
| Weight | 68 lbs |
