MORSE 237Q56L5
MORSE
MORSE 237Q56L5
237Q56L5 PART NUMBER
XF1091
MFR
XF1091 Right Angle Worm Gear Speed Reducer - Single Reduction, 5:1 Ratio, 2.37 in Center Distance, C-Face Quill, 0.6250 in Input Size, Left Hand Output, 56C Frame
QTY QUOTEMORSE - MORSE 237Q56L5
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
All Units Filled with Polyglycol Oil
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 2.37 in |
| Seal Material | Viton |
| Maximum Input Horsepower | 5.320 @ 1750 rpm_x000D_ hp |
| Overhung Load Capacity | 1770 lbs |
| Standard Base Kit | XF9000 |
| Output Direction | Left Hand |
| Vertical Low Base Kit | XF9002 |
| Manufacturer Reducer Size | 237 |
| Vertical High Base Kit | XF9003 |
| Input Type | C-Face Quill |
| Vertical J Base Kit | XF9004 |
| Input Size | 0.625 in |
| Hollow Output Flange Kit | XF9001 |
| Output Type | Solid Shaft |
| Torque Arm Kit | XF9007 |
| Output Size | 1.125 in |
| Riser Block Kit | XF9201 |
| Nema / Iec Frame Size | 56C |
| Input Torque | 191.6000 in-lbs @1750 input rpm 1 HP |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=3729 |
| Maximum Output Rpm | 350 rpm |
| Manufacturer Upc Number | 662000000000 |
| Maximum Output Torque | 350 in-lbs @1750 input rpm |
| Weight | 45 lbs |
