MORSE 206Q140R25
MORSE
MORSE 206Q140R25
206Q140R25 PART NUMBER
XE1136
MFR
XE1136 Right Angle Worm Gear Speed Reducer - Single Reduction, 25:1 Ratio, 2.06 in Center Distance, C-Face Quill, 0.8750 in Input Size, Right Hand Output, 143/145TC Frame
QTY QUOTEMORSE - MORSE 206Q140R25
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
All Units Filled with Polyglycol Oil
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 2.06 in |
| Seal Material | Viton |
| Maximum Input Horsepower | 1.330 @ 1750 rpm_x000D_ hp |
| Overhung Load Capacity | 1210 lbs |
| Standard Base Kit | XE9000 |
| Output Direction | Right Hand |
| Vertical Low Base Kit | XE9002 |
| Manufacturer Reducer Size | 206 |
| Vertical High Base Kit | XE9003 |
| Input Type | C-Face Quill |
| Vertical J Base Kit | XE9004 |
| Input Size | 0.875 in |
| Hollow Output Flange Kit | XE9001 |
| Output Type | Solid Shaft |
| Torque Arm Kit | XE9005 |
| Output Size | 1 in |
| Riser Block Kit | XE9201 |
| Nema / Iec Frame Size | 143/145TC |
| Input Torque | 47.9000 in-lbs @1750 input rpm 1 HP |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=3621 |
| Maximum Output Rpm | 70 rpm |
| Manufacturer Upc Number | 662000000000 |
| Maximum Output Torque | 70 in-lbs @1750 input rpm |
| Weight | 29 lbs |
