MORSE 154Q56R25
MORSE
MORSE 154Q56R25
154Q56R25 PART NUMBER
XC1106
MFR
Raider Plus® XC1106 Right Angle Worm Gear Speed Reducer - Single Reduction, 25:1 Ratio, 1.54 in Center Distance, C-Face Quill, 0.6250 in Input Size, Right Hand Output, 56C Frame
QTY QUOTEMORSE - MORSE 154Q56R25
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
All Units Filled with Polyglycol Oil
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 1.54 in |
| Seal Material | Viton |
| Maximum Input Horsepower | 0.7520 @ 1750 rpm_x000D_ hp |
| Overhung Load Capacity | 860 lbs |
| Standard Base Kit | XC9000 |
| Output Direction | Right Hand |
| Vertical Low Base Kit | XC9002 |
| Manufacturer Reducer Size | 154 |
| Vertical High Base Kit | XC9003 |
| Input Type | C-Face Quill |
| Vertical J Base Kit | XC9004 |
| Input Size | 0.625 in |
| Hollow Output Flange Kit | XC9001 |
| Output Type | Solid Shaft |
| Torque Arm Kit | XC9007 |
| Output Size | 0.75 in |
| Riser Block Kit | XC9201 |
| Nema / Iec Frame Size | 56C |
| Input Torque | 27.0800 in-lbs @1750 input rpm 1 HP |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=3482 |
| Maximum Output Rpm | 70 rpm |
| Manufacturer Upc Number | 662000000000 |
| Maximum Output Torque | 70 in-lbs @1750 input rpm |
| Weight | 21 lbs |
