MORSE 154UL5
MORSE
MORSE 154UL5
154UL5 PART NUMBER
XC1001
MFR
XC1001 Right Angle Worm Gear Speed Reducer - Single Reduction, 5:1 Ratio, 1.54 in Center Distance, Solid Shaft, 0.6250 in Input Size, Left Hand Output
QTY QUOTEMORSE - MORSE 154UL5
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 1.54 in |
| Overhung Load Capacity | 860 lb |
| Maximum Input Horsepower | 1.939 @ 1750 rpm_x000D_ hp |
| Standard Base Kit | XC9000 |
| Vertical Low Base Kit | XC9002 |
| Output Direction | Left Hand |
| Vertical High Base Kit | XC9003 |
| Manufacturer Reducer Size | 154 |
| Vertical J Base Kit | XC9004 |
| Input Type | Solid Shaft |
| Hollow Output Flange Kit | XC9001 |
| Input Size | 0.625 in |
| Torque Arm Kit | XC9007 |
| Output Type | Solid Shaft |
| Output Size | 0.75 in |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=3501 |
| Maximum Output Torque | 350 in-lbs @1750 rpm input |
| Manufacturer Upc Number | 662000000000 |
