MARTIN SPROCKET & GEAR CHE7
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR CHE7
CHE7 PART NUMBER
Hanger End Shaft - 3.4375 in Bore Dia., 11.2500 in Length
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR CHE7
End shafts serve to support the end conveyor section with a standard hanger bearing and are therefore usually supplied in cold rolled steel.
End shafts are jig drilled for ease of assembly and close diametrical tolerances are held for proper bearing operation.
Manufactured from higher strength steel
Increased torque capabilities
Normally manufactured from T, G & P Material
Jig Drilling
SPECIFICATIONS
| Part Type | Hanger End Shaft |
|---|---|
| Number Of Bolts | 2 |
| Bore Diameter | 3.4375 in |
| Weight | 29.7 lbs |
| Overall Length | 11.25 in |
| Related Components | CCB7, Screw |
| Compatible Shaft Diameter | 3-7/16 in |
| Storage Dimension Height | 3.4375 in |
| Material | Steel |
| Storage Dimension Length | 11.25 in |
| Hard Coating Bearing Area | Non-Hard Coating Bearing Area |
| Storage Dimension Width | 3.4375 in |
| Heat Treat Bearing Area | Non-Heat Treat Bearing Area |
| Nominal Bolt Hole Size | 0.9063 in |
| Manufacturer Upc Number | 697950000000 |
