MARTIN SPROCKET & GEAR CHE3
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR CHE3
CHE3 PART NUMBER
Hanger End Shaft - 1.5000 in Bore Dia., 6.8750 in Length
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR CHE3
End shafts serve to support the end conveyor section with a standard hanger bearing and are therefore usually supplied in cold rolled steel.
End shafts are jig drilled for ease of assembly and close diametrical tolerances are held for proper bearing operation.
Manufactured from higher strength steel
Increased torque capabilities
Normally manufactured from T, G & P Material
Jig Drilling
SPECIFICATIONS
| Part Type | Hanger End Shaft |
|---|---|
| Number Of Bolts | 2 |
| Bore Diameter | 1.5 in |
| Weight | 3.5 lbs |
| Overall Length | 6.875 in |
| Related Components | CCB3, Screw |
| Compatible Shaft Diameter | 1-1/2 in |
| Storage Dimension Height | 1.5 in |
| Material | Steel |
| Storage Dimension Length | 6.875 in |
| Hard Coating Bearing Area | Non-Hard Coating Bearing Area |
| Storage Dimension Width | 1.5 in |
| Heat Treat Bearing Area | Non-Heat Treat Bearing Area |
| Nominal Bolt Hole Size | 0.5313 in |
| Manufacturer Upc Number | 697950000000 |
