MARTIN SPROCKET & GEAR 35BS12HT 5/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 35BS12HT 5/8
35BS12HT 5/8 PART NUMBER
SABER Finished Bore Sprocket - 35 / 3/8 in, Bored to Size, 0.6250 in Bore , 12 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 35BS12HT 5/8
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 12 |
|---|---|
| Hub Outside Diameter | 1.2188 in |
| Bore Diameter | 0.625 in |
| Hub Outside Diameter At Recess | 1.072 in |
| Length Through Bore | 0.75 in |
| Hub Projection | 0.5781 in |
| Maximum Bore Diameter | 0.75 in |
| Hub Recess Depth | 0.047 in |
| Outside Diameter | 1.625 in |
| Hub Recess Width | 0.156 in |
| Chain Number & Pitch | 35 / 3/8 in |
| Number Of Set Screws | 2 |
| Bore Type | Bored to Size |
| Set Screw Size | .250-20 X .250 in |
| Number Of Strands Across | 1 |
| Set Screw Location | (1) over Keyway and (1) @ 90° |
| Material | Steel |
| Keyway Size | 3/16 x 3/32 in |
| Number Of Hubs | 1 |
| Stocked Finished Bore | 5/8 in |
| Pitch Type | Single |
| Storage Dimension Height | 0.8125 in |
| Pitch Diameter | 1.4489 in |
| Storage Dimension Length | 1.9375 in |
| Caliper Diameter | 1.2489 in |
| Storage Dimension Width | 1.9375 in |
| Tooth Width | 0.168 in |
| Weight | 0.14 lbs |
| Hardened Teeth | With Hardened Teeth |
| Manufacturer Upc Number | 697950158983 |
| Hub Diameter | 1.2188 in |
