MARTIN SPROCKET & GEAR 35BS18 7/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 35BS18 7/8
35BS18 7/8 PART NUMBER
Bored to Size Sprocket - 35 / 3/8 in, Bored to Size, 0.8750 in Bore , 18 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 35BS18 7/8
These finished bore sprockets are shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws€¦ keyed on centerline of tooth
SPECIFICATIONS
| Number Of Teeth | 18 |
|---|---|
| Caliper Diameter | 1.9595 in |
| Bore Diameter | 0.875 in |
| Tooth Width | 0.168 in |
| Length Through Bore | 0.75 in |
| Hardened Teeth | Non-Hardened Teeth |
| Outside Diameter | 2.352 in |
| Hub Diameter | 1.7188 in |
| Chain / Sprocket Type | Standard Roller Chain |
| Keyway Size | 3/16 x 3/32 in |
| Chain Number & Pitch | 35 / 3/8 in |
| Storage Dimension Height | 13/16 in |
| Bore Type | Bored to Size |
| Storage Dimension Length | 2.6875 in |
| Number Of Strands Across | 1 |
| Storage Dimension Width | 2.6875 in |
| Material | Steel |
| Surface Treatment | Protective Coating |
| Number Of Hubs | 1 |
| Weight | 0.35 lbs |
| Pitch Type | Single |
| Manufacturer Upc Number | 697950001425 |
| Pitch Diameter | 2.1595 in |
