MARTIN SPROCKET & GEAR 50BS11HT 5/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 50BS11HT 5/8
50BS11HT 5/8 PART NUMBER
SABER Finished Bore Sprocket - 50 / 5/8 in, Bored to Size, 0.6250 in Bore , 11 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 50BS11HT 5/8
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 11 |
|---|---|
| Hub Outside Diameter | 1.75 in |
| Bore Diameter | 0.625 in |
| Hub Outside Diameter At Recess | 1.5 in |
| Length Through Bore | 1.75 in |
| Hub Projection | 0.6563 in |
| Maximum Bore Diameter | 1 in |
| Hub Recess Depth | 0.125 in |
| Outside Diameter | 2.504 in |
| Hub Recess Width | 0.25 in |
| Chain Number & Pitch | 50 / 5/8 in |
| Number Of Set Screws | 2 |
| Bore Type | Bored to Size |
| Set Screw Size | .250-20 X .250 in |
| Number Of Strands Across | 1 |
| Set Screw Location | (1) over Keyway and (1) @ 90° |
| Material | Steel |
| Keyway Size | 3/16 x 3/32 in |
| Number Of Hubs | 1 |
| Stocked Finished Bore | 5/8 in |
| Pitch Type | Single |
| Storage Dimension Height | 1.0625 in |
| Pitch Diameter | 2.2184 in |
| Storage Dimension Length | 2.5625 in |
| Caliper Diameter | 1.7958 in |
| Storage Dimension Width | 2.5625 in |
| Tooth Width | 0.343 in |
| Weight | 0.56 lbs |
| Hardened Teeth | With Hardened Teeth |
| Manufacturer Upc Number | 697950161112 |
| Hub Diameter | 1-3/4 in |
