MARTIN SPROCKET & GEAR 40BS23HT 1 3/16
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 40BS23HT 1 3/16
40BS23HT 1 3/16 PART NUMBER
SABER Finished Bore Sprocket - 40 / 1/2 in, Bored to Size, 1.1875 in Bore , 23 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 40BS23HT 1 3/16
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 23 |
|---|---|
| Hub Diameter | 3 in |
| Bore Diameter | 1.1875 in |
| Hub Outside Diameter | 3 in |
| Length Through Bore | 1 in |
| Hub Projection | 0.7188 in |
| Maximum Bore Diameter | 2 in |
| Number Of Set Screws | 2 |
| Outside Diameter | 3.938 in |
| Set Screw Size | .313-18 X .313 in |
| Chain Number & Pitch | 40 / 1/2 in |
| Set Screw Location | (1) over Keyway and (1) @ 90° |
| Bore Type | Bored to Size |
| Keyway Size | 1/4 x 1/8 in |
| Number Of Strands Across | 1 |
| Stocked Finished Bore | 1-3/16 in |
| Material | Steel |
| Storage Dimension Height | 1.0625 in |
| Number Of Hubs | 1 |
| Storage Dimension Length | 4.3125 in |
| Pitch Type | Single |
| Storage Dimension Width | 4.3125 in |
| Pitch Diameter | 3.672 in |
| Weight | 1.7 lbs |
| Caliper Diameter | 3.3514 in |
| Manufacturer Upc Number | 697950160559 |
| Tooth Width | 0.284 in |
| Hardened Teeth | With Hardened Teeth |
