MARTIN SPROCKET & GEAR 40BS9HT 1/2
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 40BS9HT 1/2
40BS9HT 1/2 PART NUMBER
SABER Finished Bore Sprocket - 40 / 1/2 in, Bored to Size, 0.5000 in Bore , 9 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 40BS9HT 1/2
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 9 |
|---|---|
| Hub Outside Diameter | 1.125 in |
| Bore Diameter | 0.5 in |
| Hub Outside Diameter At Recess | 0.906 in |
| Length Through Bore | 0.875 in |
| Hub Projection | 0.5938 in |
| Maximum Bore Diameter | 0.625 in |
| Hub Recess Depth | 0.1095 in |
| Outside Diameter | 1.674 in |
| Hub Recess Width | 0.1875 in |
| Chain Number & Pitch | 40 / 1/2 in |
| Number Of Set Screws | 2 |
| Bore Type | Bored to Size |
| Set Screw Size | .250-20 X .250 in |
| Number Of Strands Across | 1 |
| Set Screw Location | (1) over Keyway and (1) @ 90° |
| Material | Steel |
| Stocked Finished Bore | 1/2 in |
| Number Of Hubs | 1 |
| Storage Dimension Height | 0.9375 in |
| Pitch Type | Single |
| Storage Dimension Length | 1.9375 in |
| Pitch Diameter | 1.4619 in |
| Storage Dimension Width | 1.9375 in |
| Caliper Diameter | 1.1277 in |
| Weight | 0.2 lbs |
| Tooth Width | 0.284 in |
| Manufacturer Upc Number | 697950161037 |
| Hardened Teeth | With Hardened Teeth |
| Hub Diameter | 1-1/16 in |
