MARTIN SPROCKET & GEAR 60BS44 1 1/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 60BS44 1 1/8
60BS44 1 1/8 PART NUMBER
Bored to Size Sprocket - 60 / 3/4 in, Bored to Size, 1.1250 in Bore , 44 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 60BS44 1 1/8
These finished bore sprockets are shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws… keyed on centerline of tooth
SPECIFICATIONS
| Number Of Teeth | 44 |
|---|---|
| Pitch Diameter | 10.5132 in |
| Bore Diameter | 1.125 in |
| Caliper Diameter | 10.0442 in |
| Length Through Bore | 1.25 in |
| Tooth Width | 0.459 in |
| Outside Diameter | 10.936 in |
| Hardened Teeth | Non-Hardened Teeth |
| Chain / Sprocket Type | Standard Roller Chain |
| Storage Dimension Height | 1.25 in |
| Chain Number & Pitch | 60 / 3/4 in |
| Storage Dimension Length | 10.936 in |
| Bore Type | Bored to Size |
| Storage Dimension Width | 10.936 in |
| Number Of Strands Across | 1 |
| Surface Treatment | Protective Coating |
| Material | Steel |
| Weight | 13.4 lbs |
| Number Of Hubs | 1 |
| Manufacturer Upc Number | 697950308241 |
| Pitch Type | Single |
