MARTIN SPROCKET & GEAR 35BS13HT 1/2
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 35BS13HT 1/2
35BS13HT 1/2 PART NUMBER
SABER Finished Bore Sprocket - 35 / 3/8 in, Bored to Size, 0.5000 in Bore , 13 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 35BS13HT 1/2
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 13 |
|---|---|
| Hub Outside Diameter | 1.25 in |
| Bore Diameter | 0.5 in |
| Hub Outside Diameter At Recess | 1.156 in |
| Length Through Bore | 0.75 in |
| Hub Projection | 0.5781 in |
| Maximum Bore Diameter | 0.75 in |
| Hub Recess Depth | 0.047 in |
| Outside Diameter | 1.746 in |
| Hub Recess Width | 0.156 in |
| Chain Number & Pitch | 35 / 3/8 in |
| Number Of Set Screws | 2 |
| Bore Type | Bored to Size |
| Set Screw Size | .250-20 X .250 in |
| Number Of Strands Across | 1 |
| Set Screw Location | @ 90° |
| Material | Steel |
| Stocked Finished Bore | 1/2 in |
| Number Of Hubs | 1 |
| Storage Dimension Height | 0.8125 in |
| Pitch Type | Single |
| Storage Dimension Length | 1.9375 in |
| Pitch Diameter | 1.567 in |
| Storage Dimension Width | 1.9375 in |
| Caliper Diameter | 1.3556 in |
| Weight | 0.19 lbs |
| Tooth Width | 0.168 in |
| Manufacturer Upc Number | 697950158990 |
| Hardened Teeth | With Hardened Teeth |
| Hub Diameter | 1-1/4 in |
