MRC (SKF) 315S
MRC (SKF)
MRC (SKF) 315S
315S PART NUMBER
Radial/Deep Groove Ball Bearing - Round Bore, 75 mm ID, 160 mm OD, 37 mm Width, Open, Internal Clearance: C0
QTY QUOTEMRC (SKF) - MRC (SKF) 315S
Single-row radial deep groove bearing can carry significant radial loads, and, because of the uninterrupted raceway grooves and the high degree of conformity between balls and raceways, it can carry substantial thrust loads in either direction, even at very high speeds
SPECIFICATIONS
| Bore Diameter | 75 mm |
|---|---|
| Precision Rating | ABEC 1 (ISO Class Normal) |
| Outside Diameter | 160 mm |
| Finish/Coating | Uncoated |
| Overall Width | 37 mm |
| Cage Material | Steel |
| Bore Type | Round |
| Outer Ring Width | 37 mm |
| Closure Type | Open |
| Fillet Radius | 2 mm |
| Row Type & Fill Slot | Single Row Non-Fill Slot |
| Maximum Rpm | 5000 RPM |
| Internal Clearance | C0 |
| Series | 300-S |
| Dynamic Load Capacity | 25600 lbf |
| Additional Details | Open bearing: Prefix designation S , Sealed on both sides: Prefix designation ZZ , Shielded on both sides: Prefix designation FF , Snap ring groove: Prefix designation G |
| Static Load Capacity | 17200 lbf |
