AMERICAN CONTROL ELECTRONICS RGM400-10
AMERICAN CONTROL ELECTRONICS
AMERICAN CONTROL ELECTRONICS RGM400-10
RGM400-10 PART NUMBER
DC Drive - 2 hp, 115/230 V ac Input, 1 ph, 90/180 V dc Output, Regenerative, IP-00 Rated, 50/60 Hz, Chassis
QTY QUOTEAMERICAN CONTROL ELECTRONICS - AMERICAN CONTROL ELECTRONICS RGM400-10
Regenerative/4-Quadrant drives have the ability to perform quick and contactorless braking and/or reversing on-the-fly
Stopping Modes: Inhibit for braking to a stop, enable for coasting to a stop, can be used for rapid starting and stopping
Can be configured to be either normally open or normally closed
Quick disconnect terminal allows for quicker wiring and setup
Diagnostic LEDs: Forward current limit, reverse current limit, power
Accepts tachogenerator feedback for tighter speed regulation
1.37 form factor
2% base speed regulation over 50:1 speed range, 0.5% speed regulation over 60:1 speed range with tachometer
Trim pots: Maximum speed, minimum speed, forward acceleration, reverse deceleration, forward current limit, reverse current limit, IR compensation, deadband, tach
SPECIFICATIONS
| Horsepower | 2 hp |
|---|---|
| Max Horsepower | 2 hp |
| Drive Input Voltage | 115/230 V ac |
| Max Current | 10 A |
| Drive Input Phase | 1 ph |
| Continuous Current | 10 A |
| Drive Output Voltage | 90/180 V dc |
| Peak Current | 10 A |
| Drive Type | Regenerative |
| Ambient Temperature Range | 50 to 131 °F |
| Enclosure Rating | IP-00 |
| Brake Type | Regenerative |
| Function Of Controller | Forward/Stop/Reverse |
| Braking | Yes |
| Feedback Type | Tachogenerator |
| Standards Met | UL Listed |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | https://www.americancontrolelectronics.com/p-55-rgm400-10.aspx |
| Enclosure Type | Chassis |
| Min Horsepower | 1/8 hp |
