AMERICAN CONTROL ELECTRONICS PAT440-10
AMERICAN CONTROL ELECTRONICS
AMERICAN CONTROL ELECTRONICS PAT440-10
PAT440-10 PART NUMBER
DC Drive - 2 hp, 115/230 V ac Input, 1 ph, 90/180 V dc Output, Non-Regenerative, NEMA 4X Rated, 50/60 Hz, NEMA 4X
QTY QUOTEAMERICAN CONTROL ELECTRONICS - AMERICAN CONTROL ELECTRONICS PAT440-10
Plastic corrosion-resistant weatherproof enclosure protects against dirt and splashing
Voltage output to energize the field winding of a shunt-wound motor
Inhibit (NO) for coasting to a stop, can be used for rapid starting and stopping
Power and current limit diagnostic LEDs
Pre-wired On/Off switches
Includes on-board fusing
1.37 form factor
1% base speed regulation
60:1 speed range
Trim pots: Maximum speed, minimum speed, acceleration/deceleration, current limit, IR compensation
SPECIFICATIONS
| Horsepower | 2 hp |
|---|---|
| Max Current | 10 A |
| Drive Input Voltage | 115/230 V ac |
| Continuous Current | 10 A |
| Drive Input Phase | 1 ph |
| Peak Current | 10 A |
| Drive Output Voltage | 90/180 V dc |
| Ambient Temperature Range | 50 to 104 °F |
| Drive Type | Non-Regenerative |
| Brake Type | None |
| Enclosure Rating | NEMA 4X |
| Braking | No |
| Function Of Controller | Run/Stop |
| Standards Met | UL Listed |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | https://www.americancontrolelectronics.com/p-35-pat440-10.aspx |
| Enclosure Type | NEMA 4X |
| Min Horsepower | 1/8 hp |
| Max Horsepower | 2 hp |
