LEESON ELECTRIC M1125270.00
LEESON ELECTRIC
LEESON ELECTRIC M1125270.00
M1125270.00 PART NUMBER
Parallel Brushed DC Gearmotor - Parallel Shaft, 29 :1 Ratio, 1/4 hp, 90 V, TENV, Footed/Face Mount
QTY QUOTELEESON ELECTRIC - LEESON ELECTRIC M1125270.00
Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance
Frame, endshields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil
Precision machined in-line steel gears
First stage steel helical gear followed by spur-type gears
Lubrication is permanent semi-fluid grease, reducing possibility of leakage
Output shafts have needle bearings for high load capacities
Gearbox Shafts are hardened steel
Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out
Conduit box cover is made from 304 stainless steel
For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
All hardware is stainless steel
Painted with white epoxy for superior corrosion resistance and protection
Machined fits between the endbells and motor frame are sealed with gaskets
Thru-bolt heads and nuts sealed with fiber washers
O-rings under each threaded brush cover
SPECIFICATIONS
| Motor Type | Brushed |
|---|---|
| Insulation Class | F3 |
| Shaft Type | Parallel |
| Dc Armature Voltage | 90 V |
| Input Horsepower | 1/4 hp |
| Standards Met | CE, UL, CSA |
| Motor Supply Voltage | 90 V |
| Enclosure Abbreviation | TENV |
| Gear Ratio | 29 :1 |
| Ip Rating | IP55 |
| Output Rpm | 83 rpm |
| Duty / Condition Type | Continuous Duty |
| Full Load Torque | 155 in-lbs |
| Weight | 17 lbs |
| Full Load Current | 2.70 A |
| Harmonization Code | 8501.31.4000 |
| Enclosure Type | TENV (Totally Enclosed Non-Ventilated) |
| Manufacturer Catalog | https://cld.bz/zner21w/I |
| Mounting Type | Footed/Face |
| Manufacturer Product Page | http://www.leeson.com/leeson/searchproduct.do?invoke=viewProductDetails&motorNo=M1125270.00&productType= |
