GARLOCK 29518-8507
GARLOCK
GARLOCK 29518-8507
29518-8507 PART NUMBER
KLOZURE® ISO-GARD® ISO-GARD® Bearing Isolator - Filled PTFE - Grease Purgeable Design - 6.6923 in Shaft Diameter, 7.9430 in OD, 0.8200 in Wide, Labyrinth Lip
QTY QUOTEGARLOCK - GARLOCK 29518-8507
The KLOZURE® ISO-GARD Filled PTFE Bearing Isolator family provides excellent chemical resistance and exceptional bearing protection under the harshest conditions
Non-wearing components provide lifetime bearing protection
Engineered labyrinth design excludes contamination while retaining bearing lubrication
Non-contact design uses 97% - 99% less energy vs. contact lip seals
Operating Temperature: -22°F to 400°F (-30°C to 204°C)
Made in USA
Relief in seal allows regreasing.
Non-flooded (oil level below drain port), splash/bath, or drop/spray/mist applications only.
Assembled Design
IP 65 Rating per NEMA MG 1-2003.
Meets IEEE 841-2001 and API 610 standards.
SPECIFICATIONS
| Shaft Diameter | 6.6923 in |
|---|---|
| Typical Application | Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Chemical Industry, Food and Pharmaceutical Industry, Hydroelectric Industry, Power Generation Industry, Wind Turbine Industry, Oil and Gas Industry, Mining Industry, other Industrial Applications |
| Lip Material | Labyrinth |
| Harmonization Code | 3926904590.US |
| Construction Description | ISO-GARD® Grease Purgeable Design, Filled PTFE Rotor and Stator, FKM O-Rings, 0.320" Flange |
| Manufacturer Catalog Number | 29518-8507 |
| Continuous Temperature Range | -22 to 400°F |
| Weight | 0.32 lb |
| Maximum Shaft Surface Speed | 4500 fpm |
| Outside Diameter | 7.943 in |
| Misalignment Tolerance | 0.02 in |
| Width | 0.82 in |
| Pressure Tolerance | Ambient |
