ENCP3581T-4 | BALDOR-RELIANCE ENCP3581T-4 | 518806| BALDOR-RELIANCE

Motor Category	General Severe Duty Motor
Shaft Diameter	0.88 in
Motor Phase	3 ph
Overall Length (C-Dimension)	11.36 in
Motor Horsepower	1.00 , 1 hp
Service Factor	1.15
Synchronous Rpm	1800 rpm
Frame Material	Cast Iron
Motor Supply Voltage	460 V
Insulation Class	F
Frame Size	143T
Ip Rating	55
Enclosure Type	TENV (Totally Enclosed Non-Ventilated)
Standards Met	UR, CSA EEV, CSA, CCSA US
Frequency Rating	60 Hz
Harmonization Code	8501.52.4000
Duty / Condition Type	Continuous Duty
Weight	56 lbs
Mounting Type	Footed
Applications	Petro-chemical plants, mines, quarries, foundries, pulp and paper plants, waste management facilities, chemical plants, and other processing industry applications requiring protection against corrosion caused by severe environmental operating conditions.
Base Rpm	1750 rpm
Additional Details	Totally enclosed cast iron construction, Premium insulation system, Sealed frame fits, Gasketed conduit box, V-Ring shaft slinger, Stainless Steel nameplates, Corrosion resistant epoxy finish and Corrosion resistant hardware. Super-E® severe duty motors have NEMA Premium® efficiency, Class F insulation, 1.15 service factor and 3 year warranty. Positive lubrication system (PLS) on 250 frames and larger. Motors are marked for Division 2/Zone 2, Class I locations. Inverter Ready design with speed range and Inverter T. Code nameplate information, see chart on page 51 for specific motor information.
Full Load Current	1.50 A
Manufacturer Catalog	http://www.baldor.com/mvc/DownloadCenter/Files/CA501
Full Load Efficiency	0.875
Manufacturer Product Page	http://www.baldor.com/catalog/ENCP3581T-4
Amps @ Voltage	1.5 @ 460 A, V
Wiring Diagram	https://www.baldorvip.com/servlet/productInfoPacket?nameplate=X&layoutdiagram=X&electrical=X&connectiondiagram=X&language=E&matnr=ENCP3581T-4&vkorg=BEC
Volts @ Frequency	460 @ 60 V, Hz
Instructional Video	https://youtu.be/j-mFjRPjiFU?list=PLUJtYxZcxl_oZa19yqrOGvU3YxQu5APRV

Motor Category

General Severe Duty Motor

Shaft Diameter

0.88 in

Motor Phase

3 ph

Overall Length (C-Dimension)

11.36 in

Motor Horsepower

1.00 , 1 hp

Service Factor

1.15

Synchronous Rpm

1800 rpm

Frame Material

Cast Iron

Motor Supply Voltage

460 V

Insulation Class

Frame Size

143T

Ip Rating

Enclosure Type

TENV (Totally Enclosed Non-Ventilated)

Standards Met

UR, CSA EEV, CSA, CCSA US

Frequency Rating

60 Hz

Harmonization Code

8501.52.4000

Duty / Condition Type

Continuous Duty

Weight

56 lbs

Mounting Type

Footed

Applications

Petro-chemical plants, mines, quarries, foundries, pulp and paper plants, waste management facilities, chemical plants, and other processing industry applications requiring protection against corrosion caused by severe environmental operating conditions.

Base Rpm

1750 rpm

Additional Details

Totally enclosed cast iron construction, Premium insulation system, Sealed frame fits, Gasketed conduit box, V-Ring shaft slinger, Stainless Steel nameplates, Corrosion resistant epoxy finish and Corrosion resistant hardware. Super-E® severe duty motors have NEMA Premium® efficiency, Class F insulation, 1.15 service factor and 3 year warranty. Positive lubrication system (PLS) on 250 frames and larger. Motors are marked for Division 2/Zone 2, Class I locations. Inverter Ready design with speed range and Inverter T. Code nameplate information, see chart on page 51 for specific motor information.

Full Load Current

1.50 A

Manufacturer Catalog

http://www.baldor.com/mvc/DownloadCenter/Files/CA501

Full Load Efficiency

0.875

Manufacturer Product Page

http://www.baldor.com/catalog/ENCP3581T-4

Amps @ Voltage

1.5 @ 460 A, V

Wiring Diagram

https://www.baldorvip.com/servlet/productInfoPacket?nameplate=X&layoutdiagram=X&electrical=X&connectiondiagram=X&language=E&matnr=ENCP3581T-4&vkorg=BEC

Volts @ Frequency

460 @ 60 V, Hz

Instructional Video

https://youtu.be/j-mFjRPjiFU?list=PLUJtYxZcxl_oZa19yqrOGvU3YxQu5APRV