BALDOR-RELIANCE IDVSNM3587T
BALDOR-RELIANCE
BALDOR-RELIANCE IDVSNM3587T
IDVSNM3587T PART NUMBER
Inverter Duty Motor - 3 ph, 2 hp, 1800 rpm, 230/460 V, 145TC Frame, TENV (Totally Enclosed Non-Ventilated) Enclosure, 60 Hz
QTY QUOTE
SPECIFICATIONS
| Motor Category | Inverter Duty Motor |
|---|---|
| Overall Length (C-Dimension) | 14.65 in |
| Motor Phase | 3 ph |
| Service Factor | 1.00 |
| Motor Horsepower | 2.00 , 2 hp |
| Frame Material | Cast Iron |
| Synchronous Rpm | 1800 rpm |
| Insulation Class | F |
| Motor Supply Voltage | 230/460 V |
| Ip Rating | 44 |
| Frame Size | 145TC |
| Standards Met | UR, CSA |
| Enclosure Type | TENV (Totally Enclosed Non-Ventilated) |
| Harmonization Code | 8501.52.4000 |
| Frequency Rating | 60 Hz |
| Weight | 63 lbs |
| Duty / Condition Type | Continuous Duty |
| Applications | Conveyors, extruders, printing lines, converting, test stands, anywhere constant torque is required over a wide speed range. |
| Mounting Type | Footed |
| Additional Details | Designed specifically for Inverter operation where up to 1000:1 constant torque speed range is required. Includes provisions for stub shaft for hollow shaft encoder, three thermostats, and all 440T frames include an ODE insulated bearing. Meets NEMA MG 1, Part 31. Continuous constant torque to zero speed. |
| Thermal Protection | Thermostat |
| Manufacturer Catalog | http://www.baldor.com/mvc/DownloadCenter/Files/CA501 |
| Full Load Current | 2.80 A |
| Manufacturer Product Page | http://www.baldor.com/catalog/IDVSNM3587T |
| Full Load Efficiency | 0.865 |
| Wiring Diagram | https://www.baldorvip.com/servlet/productInfoPacket?nameplate=X&layoutdiagram=X&electrical=X&connectiondiagram=X&language=E&matnr=IDVSNM3587T&vkorg=BEC |
| Amps @ Voltage | 5.6 @ 230 ; 6.1 @ 208 ; 2.8 @ 460 A, A, A, V |
| Instructional Video | https://youtu.be/j-mFjRPjiFU?list=PLUJtYxZcxl_oZa19yqrOGvU3YxQu5APRV |
| Volts @ Frequency | 230 @ 60 ; 460 @ 60 V, V, Hz |
| Instructional Video 2 | https://youtu.be/eLa7Rg9KkeU?list=PLUJtYxZcxl_oZa19yqrOGvU3YxQu5APRV |
| Shaft Diameter | 0.88 in |
