POWER TEAM (SPX) PE604PT-220
POWER TEAM (SPX)
POWER TEAM (SPX) PE604PT-220
PE604PT-220 PART NUMBER
PE60 Electric 2-Speed Post Tensioning Pump - Single or Double-Acting, 1-1/8 hp, 0.75 gal Reservoir, 157.0 in³ Usable Capacity, 56 in³/min Flow at Max psi, 220 V, 50/60 Hz
QTY QUOTEPOWER TEAM (SPX) - POWER TEAM (SPX) PE604PT-220
Compact, light weight pump - excellent choice for rugged applications and low voltage starting
Long, trouble-free life in the most demanding work environments
Starts under load, even at the reduced voltages at construction sites
Optional fan-driven external oil cooler includes rollover guard
Insulated carrying handle
Integral 4 inch diameter fluid-filled pressure gauge with steel bezel complies with ASME B40.1 Grade A—with 0 to 10,000 psi pressure range in 100 psi increments
Sealed 3/4 gallon reservoir. Reservoir drain port is standard
Standard oil level sight gauge for accurate oil level monitoring
External spin-on filter removes contaminants from circulating oil to maximize pump, valve and cylinder/tool life
SPECIFICATIONS
| Pump Type | PE60 Electric 2-Speed Post Tensioning Pump |
|---|---|
| Reservoir Capacity (Cubic Inches) | 173.25 in³ |
| For Use With | Single or Double-Acting Cylinder Stressing Jacks w/ Power Seater |
| Usable Oil Capacity | 157 in³ |
| Power Rating | 1-1/8 hp |
| Typical Flow At Max Psi | 56 in³/min |
| Voltage | 220 V |
| Typical Flow At 10000 Psi | 56 in³/min |
| Frequency | 50/60 Hz |
| Typical Flow At 5000 Psi | 74 in³/min |
| Amperage | 25 A |
| Typical Flow At 700 Psi | 440 in³/min |
| Motor Phase | 1 ph |
| Typical Flow At 0 Psi | 704 in³/min |
| Max Rpm | 12000 rpm |
| Maximum Pressure | 10000 psi |
| Valve Part Number | 9628 |
| Sound Level At Idle/10000 Psi | 80/85 dB(a) |
| Valve Type | 4-Way, 3-Position (Tandem Center) Manual, Post-Tensioning Single-Strand Valve |
| Overall Length | 15 in |
| Valve Type/Function | 4-Way, 3-Position / Advance Hold Sequenced Return |
| Overall Width | 9.313 in |
| Valve Function Details | With valve in center position, pump is started. Next the cable is inserted into stressing tool, valve is placed in ?A? position; ?Pull? portion of stressing tool is pressurized to specified level for proper cable tensioning (?A? port is checked internally, can only be released by building pressure in ?B? position). Next the valve is placed in ?B? position, which is pressure controlled and will not exceed 6,400 psi (440 bar); ?Return? portion of stressing tool is pressurized and will release ?A? port when pressure reaches approximately one-half the ?A? port pressure??A? port remains open as long as this pressure differential is maintained. Then the pump is stopped, valve is placed in ?A? position, releasing ?B? port pressure. |
| Overall Height | 18.25 in |
| Control Switch | On/Off/Pulse |
| Weight | 51 lbs |
| Reservoir Capacity | 0.75 gal |
| Manufacturer Product Page | http://www.spxflow.com/en/power-team/pd-pe60-electric-portable/ |
