POWER TEAM (SPX) PE172A
POWER TEAM (SPX)
POWER TEAM (SPX) PE172A
PE172A PART NUMBER
PE17 Electric 2-Speed Pump - Single-Acting, 1/2 hp, 2.00 gal Reservoir, 295.0 in³ Usable Capacity, 16 in³/min Flow at Max psi, 110/115 V, 50/60 Hz
QTY QUOTEPOWER TEAM (SPX) - POWER TEAM (SPX) PE172A
Best suited for crimping, punching, pressing, up to 55 Ton; NOT FOR LIFTING
For use with single-acting or double-acting cylinders at operating pressures to 10,000
psi
For intermittent duty; starts under full load
Equipped with 1/2 hp, 3450 rpm, single-phase, thermal protected induction motor; 10 ft remote control cord
Low amperage draw; small generators and low amperage circuits can be used as power source
Extremely quiet noise level (67-81 dBA)
SPECIFICATIONS
| Pump Type | PE17 Electric 2-Speed Pump |
|---|---|
| Usable Oil Capacity | 295 in³ |
| For Use With | Single-Acting Cylinders |
| Reservoir Material | Thermoplastic |
| Power Rating | 1/2 hp |
| Typical Flow At Max Psi | 16 in³/min |
| Voltage | 110/115 V |
| Typical Flow At 10000 Psi | 16 in³/min |
| Frequency | 50/60 Hz |
| Typical Flow At 5000 Psi | 20 in³/min |
| Amperage | 10 A |
| Typical Flow At 100 Psi | 190 in³/min |
| Motor Phase | 1 ph |
| Typical Flow At 0 Psi | 290 in³/min |
| Max Rpm | 3450 rpm |
| Maximum Pressure | 10000 psi |
| Valve Part Number | 45554 |
| Sound Level At Idle/10000 Psi | 64/81 dB(a) |
| Valve Type | Auto Dump Manifold |
| Overall Length | 11.375 in |
| Valve Type/Function | Auto Dump Manifold / Advance Return |
| Overall Width | 9.25 in |
| Control Switch | Remote Motor Control (10 ft) On/Off |
| Overall Height | 18.5 in |
| Reservoir Capacity | 2 gal |
| Weight | 50 lbs |
| Reservoir Capacity (Cubic Inches) | 462 in³ |
| Manufacturer Product Page | http://www.spxflow.com/en/power-team/pd-pe-foundation-repair-pump/ |
