FAG (SCHAEFFLER) 3204-BD-TVH

FAG (SCHAEFFLER)

FAG (SCHAEFFLER) 3204-BD-TVH

3204-BD-TVH PART NUMBER

Double Row Angular Contact Bearing - 20 mm Bore, 47 mm OD, 0.8125 in Width, Open, 30 ° Contact Angle, C0

QTY QUOTE

FAG (SCHAEFFLER) - FAG (SCHAEFFLER) 3204-BD-TVH

Solid inner and outer rings and ball and cage assemblies with polyamide or sheet steel cages

Construction is similar to a pair of single row angular contact ball bearings in an O arrangement but they are narrower to a certain extent

Available in open and sealed designs

Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for seals or shields

Sealed bearings are maintenance-free and therefore allow particularly economical bearing arrangements

Due to the raceway geometry and the two rows of balls, the bearing can support forces in both radial and axial directions and are therefore particularly suitable for use in pumps and agricultural machinery

Used in applications including conveying equipment, packaging equipment, elevators and compressors

The angular adjustment facility of angular contact ball bearings is very limited and, therefore the adjustment angle should not exceed two

Bearings of X-life quality have improved running accuracy and optimized surfaces which gives a significant increase in the fatigue limit load of the bearings

In terms of the expanded adjusted rating life, values up to 50% are achieved

In certain applications, this means that a smaller bearing arrangement can be designed

Lower noise levels, reduced friction, improved sealing and higher cost-effectiveness

Angular contact ball bearings with cages made from glass fibre reinforced polyamide have the suffix TVH

Polymide cages were optimized on the basis of objectives similar to those for the steel cages: higher rigidity, better grease distribution, reduced energy consumption and thus lower generation of heat and noise, allowing higher speeds as well as a longer grease and bearing operating life