CHAR-LYNN (EATON) 193-0056-001
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 193-0056-001
193-0056-001 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 2000 - 2-Speed - Standard, 130.6 cm³/r Max Geometric Displacement
QTY QUOTE
SPECIFICATIONS
| Series | 2000 - 2-Speed - Standard |
|---|---|
| Replacement Drive - Sold Separately | 001 Design - 21371-004 - 1 Required |
| Displacement | 7.97 in³/r |
| Replacement Drive Valve - Sold Separately | 001 Design - 8433-000 - 1 Required |
| Mounting Type | 2-olt Flange - 4 in Pilot - SAE B |
| Replacement Geroler - Sold Separately | 001 Design - 21625-003 - 1 Required |
| Shaft Type | Splined |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 001 Design - 21578-001 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 001 Design - 14384-012 - 4 Required |
| Output Shaft Size | 7/8 in - 13T Spline |
| Replacement Output Shaft And Bearing Kit - Sold Separately | 001 Design - 21618-007 - 1 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Plate Valve - Sold Separately | 001 Design - 21722-000 - 1 Required |
| Drain Connection Size | .5625-18 Unf-2b O-ring Port Size -6 |
| Replacement Rear Housing - Sold Separately | 001 Design - 21602-001 - 1 Required |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Valve-Sold Separately | 001 Design - 23047-000 - 1 Required |
| Port Orientation | Staggered Ports |
| Replacement Viton Seal Kit - Sold Separately | 001 Design - 61274-000 - 1 Required |
| Replacement Balance Ring - Sold Separately | 001 Design - 21601-000 - 1 Required |
| Replacement Wear Place - Sold Separately | 001 Design - 22026-000 - 1 Required |
| Replacement Buna Seal Kit - Sold Separately | 001 Design - 61267-000 - 1 Required |
| Actual Mounting Flange | 2-Bolt Flange - Sae B - With 4 In. Pilot Dia. |
