CHAR-LYNN (EATON) 104-1407-006
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 104-1407-006
104-1407-006 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 2000 - Standard, 306.6 cm³/r Max Geometric Displacement
QTY QUOTE
SPECIFICATIONS
| Series | 2000 - Standard |
|---|---|
| Replacement Drive Valve - Sold Separately | 006 Design - 8433-000 - 1 Required |
| Displacement | 18.71 in³/r |
| Replacement Geroler - Sold Separately | 006 Design - 21625-007 - 1 Required |
| Mounting Type | 2-Bolt Flange - 3.25 in Pilot - SE A |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 006 Design - 21578-004 - 1 Required |
| Shaft Type | Splined |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 006 Design - 14384-012 - 4 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Output Shaft And Bearing Kit - Sold Separately | 006 Design - 21618-005 - 1 Required |
| Output Shaft Size | 1 in SAE - 6B Spline |
| Replacement Pin For Balance Ring - Sold Separately | 006 Design - 14351-000 - 2 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Plate Valve - Sold Separately | 006 Design - 22134-000 - 1 Required |
| Drain Connection Size | .4375-20 Unf-2b O-ring Port Size -4 |
| Replacement Rear Housing - Sold Separately | 006 Design - 21564-004 - 1 Required |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Valve-Sold Separately | 006 Design - 21466-000 - 1 Required |
| Port Orientation | Staggered Ports |
| Replacement Viton Seal Kit - Sold Separately | 006 Design - 61263-000 - 1 Required |
| Replacement Balance Ring - Sold Separately | 006 Design - 8915-000 - 1 Required |
| Replacement Wear Place - Sold Separately | 006 Design - 22102-000 - 1 Required |
| Replacement Buna Seal Kit - Sold Separately | 006 Design - 61258-000 - 1 Required |
| Replacement Pin For Balancing Ring - Sold Separately | 006 Design - 14351-000 - 2 Required |
| Replacement Drive - Sold Separately | 006 Design - 21371-007 - 1 Required |
| Actual Mounting Flange | 2-Bolt Flange - Sae A - With 3-1/4 In. Pilot Dia. |
