CHAR-LYNN (EATON) 101-2834-009
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 101-2834-009
101-2834-009 PART NUMBER
Hydraulic Gerotor Spool Valve Motor - H-Series, 2.8 in³/r, 2-Bolt
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 101-2834-009
Time-tested Char-Lynn drive set
Three moving components (gerotor-star, drive, and shaft)
Optimized drive running angle
Three-zone pressure design (inlet, return and case)
Variety of displacements, shafts and mounts
Special options to meet customer needs
SPECIFICATIONS
| Series | H-Series |
|---|---|
| Replacement Buna Seal Kit - Sold Separately | 001 Design - 60023-000, 002 & 003 Design - 60540-000 |
| Displacement | 2.80 in³/r |
| Replacement Viton Seal Kit - Sold Separately | 001 Design - 60032-000, 002 & 003 Design - 60545-000 |
| Maximum Rpm-Continuous | 969 rpm |
| Replacement Bearing Race - Sold Separately | 001, 002 & 003 Design - 7462-000 |
| Continuous Torque | 650 in-lbs |
| Replacement Needle Thrust Bearing | 001, 002 & 003 Design - 7537-000 |
| Continuous Pressure | 1800 psi |
| Replacement Output Shaft - Sold Separately | 001, 002 & 003 Design - 7360-002 |
| Continuous Flow Rate | 12 gpm |
| Replacement Gerotor - Sold Seprately | 003 Design - 8277-001 |
| Motor Port Type | Straight Thread O-Ring SAE |
| Replacement Drive - Sold Separately | 003 Design - 602-000 |
| Motor Port Size | 3/4?16 UNF-2B |
| Replacement Short Cap Screw (Mounting End) - Sold Separately | 001, 002 & 003 Design - 16292-088 - 4 Required |
| Shaft Type | Splined |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 003 Design - 16294-150 - 5 Required |
| Output Shaft Size | 1 in SAE - 6B Spline |
| Replacement Rear Housing - Sold Separately | 003 Design - 21776-001 |
| Mounting Type | 2-Bolt |
| Replacement Mounting Flange - Sold Separately | 003 & 002 Design 22000-001, 001 Design 7463-000 |
| Seal Type | Standard |
| Weight | 11.2 lbs |
| Case Drain | No Case Drain |
| Recommended Fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Inlet And Outlet Port Size | Straight Thread O-ring SAE 3/4-16 UNF-2B Ports Size 8 |
| Recommended Filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual Port Type | End ed with .750-16 Unf-2B O-ring , Size 8 Without Spotface Accepts Fittings For Sae J1926. Housing with .875-14 Unf-2B O-ring Port |
| Repair Parts Drawing# | 6-130 |
| Maximum Operating Temperature | 180 °F |
| Manufacturer Product Page | http://www.eatonpowersource.com/products/configure/motors/details/101-2834-009/ |
| Intermittent Flow Rate | 14 gpm |
| Intermittent Pressure | 2400 psi |
| Intermittent Torque | 876 in-lbs |
