CHAR-LYNN (EATON) 101-2654-009
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 101-2654-009
101-2654-009 PART NUMBER
Hydraulic Gerotor Spool Valve Motor - H-Series, 17.9 in³/r, 4-Bolt Flange - 1.75 in Pilot
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 101-2654-009
Time-tested Char-Lynn drive set
Three moving components (gerotor-star, drive, and shaft)
Optimized drive running angle
Three-zone pressure design (inlet, return and case)
Variety of displacements, shafts and mounts
Special options to meet customer needs
SPECIFICATIONS
| Series | H-Series |
|---|---|
| Replacement Buna Seal Kit - Sold Separately | 007 Design - 60023-000, 008 & 009 Design - 60540-000 |
| Displacement | 17.90 in³/r |
| Replacement Viton Seal Kit - Sold Separately | 007 Design - 60032-000, 008 & 009 Design - 60544-000 |
| Maximum Rpm-Continuous | 192 rpm |
| Replacement Bearing Race - Sold Separately | 007, 008 & 009 Design - 7462-000 |
| Continuous Torque | 3110 in-lbs |
| Replacement Needle Thrust Bearing | 007, 008 & 009 Design - 7537-000 |
| Continuous Pressure | 1350 psi |
| Replacement Output Shaft - Sold Separately | 007, 008 & 009 Design - 7360-001 |
| Continuous Flow Rate | 15 gpm |
| Replacement Gerotor - Sold Seprately | 009 Design - 8277-026 |
| Motor Port Type | Straight Thread O-Ring SAE |
| Replacement Drive - Sold Separately | 009 Design - 22253-000 |
| Motor Port Size | 7/8?14 UNF-2B |
| Replacement Short Cap Screw (Mounting End) - Sold Separately | 007, 008 & 009 Design - 16292-088 - 4 Required |
| Shaft Type | Straight |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 009 Design - 16294-288 - 7 Required |
| Output Shaft Size | 1 in Straight - Woodruff Key |
| Replacement Rear Housing - Sold Separately | 009 Design - 22230-001, 008 & 007 Design - 7359-001 |
| Mounting Type | 4-Bolt Flange - 1.75 in Pilot |
| Replacement Mounting Flange - Sold Separately | 009 & 008 Design 22000-002, 007 Design 7464-000 |
| Seal Type | High Pressure |
| Weight | 14 lbs |
| Case Drain | No Case Drain |
| Recommended Fluids | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, |
| Inlet And Outlet Port Size | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
| Recommended Filtration | Per Iso Cleanliness Code. Level 18/13 |
| Actual Port Type | .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926 |
| Repair Manual# | 7-117 |
| Actual Output Shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And 1/4-20 Threaded Hole |
| Repair Parts Drawing# | 6-121 |
| Actual Mounting Flange | Standard, 2 Bolt: 82.6 [3.25] X 3.0 [.12] Pilot, 13.59 [.535] Dia. |
| Manufacturer Product Page | http://www.eatonpowersource.com/products/configure/motors/details/101-2654-009/ |
| Maximum Operating Temperature | 180 °F |
| Intermittent Flow Rate | 20 gpm |
| Intermittent Pressure | 1800 psi |
| Intermittent Torque | 4121 in-lbs |
