CHAR-LYNN (EATON) 112-1158-006
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 112-1158-006
112-1158-006 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 6000 - Standard, 246.5 cm³/r Max Geometric Displacement, 3000 psi Maximum Operating Pressure
QTY QUOTE
SPECIFICATIONS
| Series | 6000 - Standard |
|---|---|
| Port Orientation | Staggered Ports |
| Displacement | 15.04 in³/r |
| Replacement Balance Ring - Sold Separately | 006 & 005 Design - 21317-000 - 1 Required |
| Maximum Operating Pressure | 3000 psi |
| Replacement Buna Seal Kit - Sold Separately | 006 & 005 Design - Rear Seal Kit 61238-000, 006 & 005 Design Shaft Seal Kit - 61237-000 - 1 Required |
| Continuous Torque | 6505 in-lbs |
| Replacement Drive - Sold Separately | 006 & 005 Design - 21373-002 - 1 Required |
| Maximum Rpm | 615 rpm |
| Replacement Drive Valve - Sold Separately | 006 & 005 Design - 8508-000 - 1 Required |
| Mounting Type | 4-Bolt Flange - 5 in Pilot - SAE CC |
| Replacement Geroler - Sold Separately | 006 & 005 Design - 8507-002 - 1 Required |
| Motor Port Type | Straight Thread O-Ring SAE |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 006 Design - 201839-001, 005 Design - 8490-000 - 1 Required |
| Motor Port Size | 1-5/16?12 UNF-2B |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 006 & 005 Design - 14409-002 & 14409-006 - 2 Required Of Each Bolt |
| Shaft Type | Splined |
| Replacement Output Shaft And Bearing Kit - Sold Separately | 001 Design - 201837-011 - 1 Required |
| Maximum Flow Rate | 40 gpm |
| Replacement Plate Valve - Sold Separately | 006 & 005 Design - 21666-000 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Rear Housing - Sold Separately | 006 & 005 Design - 8502-004 - 1 Required |
| Output Shaft Size | 1-1/4 in 14T Spline |
| Replacement Valve-Sold Separately | 006 & 005 Design - 8497-000 - 1 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Viton Seal Kit - Sold Separately | 006 & 005 Design - 61246-000 - 1 Required |
| Drain Connection Size | .4375-20 Unf-2b O-ring Port Size -4 |
| Actual Mounting Flange | 4-Bolt Flange - Sae Cc - With 5 In. Pilot Dia. |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
