CHAR-LYNN (EATON) 109-1311-006
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 109-1311-006
109-1311-006 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 4000 - Standard, 311.8 cm³/r Max Geometric Displacement, 3000 psi Maximum Operating Pressure
QTY QUOTE
SPECIFICATIONS
| Series | 4000 - Standard |
|---|---|
| Port Orientation | Staggered Ports |
| Displacement | 19.03 in³/r |
| Replacement Balance Ring - Sold Separately | 006 Design -21316-000 1 Required |
| Maximum Operating Pressure | 3000 psi |
| Replacement Buna Seal Kit - Sold Separately | 006 Design - Rear Seal Kit 61234-000, 006 Design - Shaft Seal Kit 61281-000 - 1 Required Each |
| Continuous Torque | 7523 in-lbs |
| Replacement Drive - Sold Separately | 006 Design - 21372-004 - 1 Required |
| Maximum Rpm | 303 rpm |
| Replacement Drive Valve - Sold Separately | 006 Design - 8510-000 - 1 Required |
| Mounting Type | 4-Bolt Flange - 5 in Pilot - SAE C |
| Replacement Geroler - Sold Separately | 006 Design - 8464-006 - 1 Required |
| Motor Port Type | Straight Thread O-Ring SAE |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 006 Design - 23170-002 - 1 Required |
| Motor Port Size | 1-1/16?12 UNF-2B |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 006 Design - 16292-162 - 8 Required |
| Shaft Type | Keyed |
| Replacement Mounting Flange - Sold Separately | 006 Design - 23171-003 - 1 Required |
| Maximum Flow Rate | 25 gpm |
| Replacement Output Shaft And Bearing Kit - Sold Separately | 006 Design - 23310-001 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Plate Valve - Sold Separately | 006 Design - 8504-000 - 1 Required |
| Output Shaft Size | 1-1/4 in Straight - Straight Key |
| Replacement Rear Housing - Sold Separately | 006 Design - 23382-003 - 1 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Valve-Sold Separately | 006 Design - 8500-000 - 1 Required |
| Drain Connection Size | .4375-20 Unf-2b O-ring Port Size -4 With Check Valve |
| Replacement Viton Seal Kit - Sold Separately | 006 Design - 61248-000 - 1 Required |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Actual Mounting Flange | 4-Bolt Flange - Sae C - With 5 In. Pilot Dia. |
