CHAR-LYNN (EATON) 129-0067-002
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 129-0067-002
129-0067-002 PART NUMBER
Hydraulic Geroler Spool Valve Motor - J-Series, 1.21 in³/r, 2-Bolt - 2.48 in Pilot
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 129-0067-002
Constant clearance Geroler set
Integrated check valves
Self-lubricating shaft bushing
High-strength rigid components
Increased valve seal lands
High pressure seals
Variety of displacements, shafts, mounts and special options
SPECIFICATIONS
| Series | J-Series |
|---|---|
| Intermittent Torque | 405 in-lbs |
| Displacement | 1.21 in³/r |
| Peak Torque | 425 in-lbs |
| Maximum Rpm-Continuous | 1043 rpm |
| Replacement Buna Seal Kit - Sold Separately | 002 Design - 60580-000 |
| Continuous Torque | 333 in-lbs |
| Replacement Bearing Race - Sold Separately | 002 Design - 16241-C1220 |
| Continuous Pressure | 2030 psi |
| Replacement Needle Thrust Bearing | 002 Design - 16241-1220 |
| Continuous Flow Rate | 5.5 gpm |
| Replacement Output Shaft - Sold Separately | 002 Design - 201354-002 |
| Motor Port Type | Metric Threaded O-Ring |
| Replacement Geroler - Sold Separately | 002 Design - 201404-003 |
| Motor Port Size | M14 x 1.5 |
| Replacement Drive - Sold Separately | 002 Design - 23017-003 |
| Shaft Type | Straight |
| Replacement Drive Spool - Sold Separately | 002 Design - 23016-003 |
| Output Shaft Size | 16 mm Straight - Square Key |
| Replacement Short Cap Screw (Mounting End) - Sold Separately | 002 Design - 16148-426 - 5 Required |
| Mounting Type | 2-Bolt - 2.48 in Pilot |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 002 Design 201334-002 |
| Seal Type | Standard |
| Replacement Rear Housing - Sold Separately | 002 Design - 201333-019 |
| Case Drain | M10 X 1-6H Metric O-ring Port |
| Replacement Mounting Flange - Sold Separately | 002 Design - 2 Bolt Kit 60553 |
| Inlet And Outlet Port Size | Metric Threaded O-ring - M14 X 1-1/2 6H Port Size |
| Weight | 4.8 lbs |
| Actual Port Type | M14 X 1.5-6H Metric O-ring Port, End Ported |
| Repair Manual# | 7-144 |
| Actual Output Shaft | Dia 16 [.630] Straight With Straight 5 [.197] Sq Key With M6 X 1 Threaded Hole |
| Repair Parts Drawing# | 6-01-147 |
| Actual Mounting Flange | 2 Bolt: Dia 62.99 [2.480] X 2.0 [.08] Pilot Dia 9 [.354] Mounting |
| Manufacturer Product Page | http://www.eatonpowersource.com/products/configure/motors/details/129-0067-002/ |
| Maximum Operating Temperature | 180 °F |
| Intermittent Flow Rate | 6.5 gpm |
| Intermittent Pressure | 2400 psi |
| Peak Pressure | 3190 psi |
