CHAR-LYNN (EATON) 106-1042-006
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 106-1042-006
106-1042-006 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 2000 - Bearingless, 194.8 cm³/r Max Geometric Displacement, 3000 psi Maximum Operating Pressure
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 106-1042-006
Three zone design for longer life and true bi-directionality
Bearings that meet the highest standards of the industry
Options to optimize performance in every application
Integrated cross-over relief valve option
Four-bolt flange, bearingless, with 4" pilot
Case drain for straight thread O-ring model: 7/16"-20 UNF-2B O-ring port size 4
Case drain for British standard pipe (BSP) model: G 1/4 British standard pipe
SPECIFICATIONS
| Series | 2000 - Bearingless |
|---|---|
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Displacement | 11.89 in³/r |
| Port Orientation | Staggered Ports |
| Maximum Operating Pressure | 3000 psi |
| Replacement Balance Ring - Sold Separately | 006 Design - 8915-000 - 1 Required |
| Continuous Torque | 4779 in-lbs |
| Replacement Buna Seal Kit - Sold Separately | 006 Design - 61259-000 - 1 Required |
| Maximum Rpm | 385 rpm |
| Replacement Drive - Sold Separately | 006 Design - 21371-005 - 1 Required |
| Mounting Type | 4-Bolt |
| Replacement Drive Valve - Sold Separately | 006 Design - 8433-000 - 1 Required |
| Motor Port Type | Straight Thread O-Ring SAE |
| Replacement Geroler - Sold Separately | 006 Design - 21625-005 - 1 Required |
| Motor Port Size | 7/8?14 UNF-2B |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 006 Design - 14384-004 - 4 Required |
| Shaft Type | Bearingless |
| Replacement Pin For Balance Ring - Sold Separately | 006 Design - 14351-000 - 2 Required |
| Maximum Flow Rate | 20 gpm |
| Replacement Plate Valve - Sold Separately | 006 Design - 22134-000 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Rear Housing - Sold Separately | 006 Design - 21564-007 - 1 Required |
| Output Shaft Size | None - Bearingless |
| Replacement Valve-Sold Separately | 006 Design - 21466-000 - 1 Required |
| Seal Type | Single Lip Seal |
| Replacement Viton Seal Kit - Sold Separately | 006 Design - 61261-000 - 1 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Wear Place - Sold Separately | 006 Design - 22102-000 - 1 Required |
| Drain Connection Size | G 1/4 British Standard Pipe |
| Replacement Pin For Balancing Ring - Sold Separately | 006 Design - 14351-000 - 2 Required |
