CHAR-LYNN (EATON) 103-3381-012
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 103-3381-012
103-3381-012 PART NUMBER
Hydraulic Geroler Spool Valve Motor - S-Series, 10.1 in³/r, 4-Bolt Flange - 1.75 in Pilot
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 103-3381-012
Constant clearance Geroler‚ design
Three moving components (gerotor, drive, shaft)
Optimized drive running angle
Three-zone pressure design (inlet, return and case)
Variety of displacements, shafts and mounts
Special options to meet customer needs
SPECIFICATIONS
| Series | S-Series |
|---|---|
| Overall Length | 151.8 mm |
| Displacement | 10.10 in³/r |
| Overall Width | 107.7 mm |
| Maximum Rpm-Continuous | 343 rpm |
| Intermittent Flow Rate | 20 gpm |
| Continuous Torque | 2662 in-lbs |
| Intermittent Pressure | 2300 psi |
| Continuous Pressure | 1900 psi |
| Intermittent Torque | 3191 in-lbs |
| Continuous Flow Rate | 15 gpm |
| Replacement Buna Seal Kit - Sold Separately | 008 Design - 60533-000, 009 & 010 Design - 60539-000 |
| Motor Port Type | National Pipe Tapered Fuel |
| Replacement Viton Seal Kit - Sold Separately | 008 Design - 60534-000, 009 & 010 Design - 60546-000 |
| Motor Port Size | 1/2?14 NPTF |
| Replacement Bearing Race - Sold Separately | 008, 009 & 010 Design - 7462-000 |
| Shaft Type | Straight |
| Replacement Needle Thrust Bearing | 008, 009 & 010 Design - 7537-000 |
| Output Shaft Size | 1 in Straight - Woodruff Key |
| Replacement Geroler - Sold Separately | 010 Design - 8632-004 |
| Mounting Type | 4-Bolt Flange - 1.75 in Pilot |
| Replacement Drive - Sold Separately | 010 Design - 8664-000 |
| Seal Type | Standard |
| Replacement Short Cap Screw (Mounting End) - Sold Separately | 008, 009 & 010 Design - 16292-088 - 4 Required |
| Case Drain | No Case Drain |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 010 Design - 16294-200 - 7 Required |
| Inlet And Outlet Port Size | 1/2-14 NPTF Ports Size 8MP |
| Repair Parts Drawing# | 6-125 |
| Actual Port Type | .500-14 NPTF Dryseal Pipe thread Ports |
| Manufacturer Product Page | http://www.eatonpowersource.com/products/configure/motors/details/103-3381-012/ |
| Actual Output Shaft | 25.4 [1.00] Dia. Straight With Woodruff Key And 1/4-20 Threaded Hole |
| Actual Mounting Flange | 4 Bolt Std: 44.4 [1.75] Dia. X 3.0 [.12] Pilot, .375-16 Mounting Holes On 82.6 [3.25] Dia. B.C. |
| Maximum Operating Temperature | 180 °F |
