GATES 16GMVXCTN
GATES
GATES 16GMVXCTN
16GMVXCTN PART NUMBER
GMV Global MegaVac® 4504-0003 Return Line / Suction Hydraulic Hose - 1.00 in ID, 1.45 in OD, 300 psi Working Pressure, 1200 psi Burst Pressure, Neoprene (Type A) Cover, Nitrile (Type C) Tube
QTY QUOTEGATES - GATES 16GMVXCTN
Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines
Meets or exceeds requirements of SAE100R4
Uses half the bend radius of SAE 100R4
Meets marine ABS with use of HeatGuard„¢ high temp sleeve
Cover is black synthetic rubber, oil- and abrasion-resistant (Neoprene Type A)
Reinforcement is double spiral textile (braid for -12, -16 and -20) reinforced with a helical spiral-wire to prevent collapse
Black synthetic rubber tube specifically designed for resistance to high temperatures (Nitrile Type C)
Flexible bend radius
Temperature range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time)
Coupling recommendation: GL Couplings or MegaCrimp® Couplings (-12 through -20)
SPECIFICATIONS
| Hose Inner Diameter | 1 in |
|---|---|
| Hose Weight | 0.54 lbs/ft |
| Hose Outer Diameter | 1.45 in |
| Segment Length Range | Maximum of 100 ft |
| Working Pressure | 300 psi |
| Physical Resistance | Abrasion, Fire, Oil |
| Burst Pressure | 1200 psi |
| Manufacturer Compatibility | This product can only be used with other Gates products. |
| Inner Tube Material | Nitrile (Type C) |
| Standards Met | MSHA 2G, SAE 100R4 |
| Hose Covering Material | Neoprene (Type A) |
| Hose Reinforcement Type | 2 Braids of Textile Reinforced with a Helical-Spiral Wire |
| Typical Applications | Hydraulic |
| Operating Temperature Range | -40 to 275 °F |
| Manufacturer Product Page | http://www.gates.com/products/industrial/industrial-hydraulics/hydraulic-hose/low-pressure/gmv-global-megavac-suction-hose |
| Color | Black |
| Additional Details | Warning: Do not use Gates belts, pulleys, sprockets, hose or couplings on any aircraft propeller or motor drive systems or in-flight accessory drives. Gates products are not designed or intended for aircraft use. |
| Minimum Bend Radius | 3 in |
| Manufacturer Catalog Number | 4504-0003 |
