RPMBRND ZEP6315F
RPMBRND
RPMBRND ZEP6315F
ZEP6315F PART NUMBER
Pillow Block Roller Bearing Unit - 3.9375 in Bore Dia., Four-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
QTY QUOTERPMBRND - RPMBRND ZEP6315F
New design tapered adapter mount spherical roller bearing units provide versatile arrangements for supporting shafts that carry substantial radial or a combination of radial and thrust loads
Incorporates an integral lock nut, sleeve and inner race along with Optical Strain Sensing (OSS) technology and a Positive Locking System (PLS) that visually indicates when the bearing is tightened to the shaft correctly
These features not only yield the most secure shaft mounting, running accuracy and ability to accommodate undersize shafting, but guarantee the correct installation every time and make removal a snap
Offers higher dynamic load ratings than the previous design, runs cooler and runs quieter yielding a bearing that lasts longer in the application
Dynamic and static misalignment capability has been increased to ±2.0°
Rollers are aligned by the retainers and the inner race, so despite misalignment, the roller load is always equally distributed across the surface; prevents high edge load stresses on the rollers and therefore it is not necessary to derate the bearing for misalignment conditions within the ±2.0°
Easy to mount and dismount, sealed, prelubricated and does not require adjustment during mounting
Additional key features include: Choice of various seal types based upon application; all seals assure protection with up to ±2.0° of misalignment in all directions, provide operation on hardened and ground inner ring extensions and can be removed without disassembly of the bearing; field adjustable bearing clearances based upon application need; fully self-aligning spherical roller bearing that accommodates for operational misalignment or misalignment due to installation; case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Cast iron housing
Clearance seal
SPECIFICATIONS
| Bore Diameter | 3.9375 in |
|---|---|
| Base Width | 4-1/2 in |
| Overall Length | 15.25 in |
| Expansion Type | Non-Expansion Bearing (Fixed) |
| Overall Height | 8.625 in |
| Finish/Coating | Powder Coated |
| Mounting | Four-Bolt Base |
| Overall Width | 5-31/32 in |
| Bearing Type | Spherical Roller |
| Seal Type | Clearance/Non-Contact |
| Bore Type | Round |
| Radial Dynamic Load Capacity | 118000 lb |
| Housing Construction | Solid Pillow Block |
| Radial Static Load Capacity | 127500 lb |
| Base To Bore Centerline | 4.25 in |
| Maximum Rpm | 2050 RPM |
| Housing Material | Cast Iron |
| Lubrication Type | Lubrication Fitting |
| Locking Device | Adapter Mount |
| Series | 6000 |
| Bolt Center-To-Center Length | 12 to 13 in |
| Standards Met | ANSI/ABMA STD 9-1990 |
