SKF P4BE 400-SRB-SRE
SKF
SKF P4BE 400-SRB-SRE
P4BE 400-SRB-SRE PART NUMBER
Pillow Block Roller Bearing Unit - 4.0000 in Bore Dia., Four-Bolt Base, Solid Pillow Block, Cast Iron Material, Expansion Bearing (Floating)
QTY QUOTESKF - SKF P4BE 400-SRB-SRE
SKF roller bearing units are assembled, greased and ready-to-mount, saving time and reducing the risk of contaminating or damaging the bearing during installation
The bearing units can be used with commercial grade shafts and are located easily on the shaft by tightening the set (grub) screws in the mounting collar or locking collar
The housing base is reinforced with ribs and the area around the attachment bolt holes is strengthened to minimize the risk of cracking caused by over-tightening the attachment bolts
With SKF inch roller bearing units, logistics costs are reduced as there is only one part to order, store and mount
SPECIFICATIONS
| Bore Diameter | 4 in |
|---|---|
| Finish/Coating | Blue Alkyd/Acryl Paint (RAL 5007) |
| Overall Length | 15.25 in |
| Overall Width | 5.25 in |
| Overall Height | 8.5625 in |
| Seal Type | TriGard Seal |
| Mounting | Four-Bolt Base |
| Radial Dynamic Load Capacity | 69900 lbf |
| Bearing Type | Spherical Roller |
| Base Height | 2.4375 in |
| Bore Type | Round |
| Maximum Operating Temperature | Max 210 °F |
| Housing Construction | Solid Pillow Block |
| Maximum Rpm | 2100 rpm |
| Base To Bore Centerline | 4.25 in |
| Lubrication Type | Lubrication Fitting |
| Housing Material | Cast Iron |
| Bolt Size | 0.75 in |
| Locking Device | Concentric Collar |
| Series | FSYE |
| Bearing Material | Cast Iron |
| Weight | 49.6 lbs |
| Bolt Center-To-Center Length | 12.0000 to 13.1250 in |
| Manufacturer Product Page | http://www.skf.com/group/products/bearings-units-housings/bearing-units/roller-bearing-units/inch/pillow-block/index.html?designation=FSYE-4&unit=imperialUnit |
| Base Width | 4.5 in |
| Manufacturer Upc Number | 7316577026682 |
| Expansion Type | Expansion Bearing (Floating) |
