SKF P2BE 300-SRB-SRH
SKF
SKF P2BE 300-SRB-SRH
P2BE 300-SRB-SRH PART NUMBER
Pillow Block Roller Bearing Unit - 3.0000 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
QTY QUOTESKF - SKF P2BE 300-SRB-SRH
SKF roller bearing units (mounted bearing units) are designed for applications where housed bearings are required to operate under difficult conditions and often outdoors and must provide reliable, long-term performance, be able to support heavy loads well and be easily replaceable should the need arise
SKF roller bearing units offer the designer relative freedom in respect of bearing arrangement design
Make for economic bearing arrangements and are primarily intended for applications where the load carrying capacity of Y-bearing units is inadequate or where conditions are particularly difficult
Ready-to-mount—they have the correct clearance, are greased and sealed
Can be used on commercial drawn shafts
Easy to mount on the shaft and are firmly locked in position
Protected against contamination in operation and during installation
Prepared for online connection to condition monitoring equipment
Allow logistics costs to be reduced as only one part has to be ordered, stored and managed
SPECIFICATIONS
| Bore Diameter | 3 in |
|---|---|
| Bolt Center-To-Center Length | 9-1/2 in |
| Overall Length | 12 in |
| Base Width | 3 in |
| Overall Height | 6.3125 in |
| Expansion Type | Non-Expansion Bearing (Fixed) |
| Mounting | Two-Bolt Base |
| Finish/Coating | Uncoated |
| Bearing Type | Spherical Roller |
| Seal Type | Tri-Guard |
| Bore Type | Round |
| Radial Dynamic Load Capacity | 47500 lbf |
| Housing Construction | Solid Pillow Block |
| Radial Static Load Capacity | 54000 lbf |
| Base To Bore Centerline | 3.125 in |
| Maximum Rpm | 1600 RPM |
| Duty Type | Standard Duty |
| Lubrication Type | Lubrication Fitting |
| Housing Material | Cast Iron |
| Series | SYE |
| Locking Device | Concentric Collar |
| Replacement Bearing | 22215 |
