SKF P2B 115-SRB-SRH
SKF
SKF P2B 115-SRB-SRH
P2B 115-SRB-SRH PART NUMBER
Pillow Block Roller Bearing Unit - 1.9375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
QTY QUOTESKF - SKF P2B 115-SRB-SRH
SKF roller bearing units (mounted bearing units) are designed for applications where housed bearings are required to operate under difficult conditions and often outdoors and must – provide reliable, long-term performance—be able to support heavy loads well—be easily replaceable should the need arise
SKF roller bearing units offer the designer relative freedom in respect of bearing arrangement design
They make for economic bearing arrangements and are primarily intended for applications where the load carrying capacity of Y-bearing units is inadequate or where conditions are particularly difficult
Ready-to-mount—they have the correct clearance, are greased and sealed
Can be used on commercial drawn shafts
Easy to mount on the shaft and are firmly locked in position
Protected against contamination in operation and during installation
Prepared for online connection to condition monitoring equipment
Allow logistics costs to be reduced as only one part has to be ordered, stored and managed.
SPECIFICATIONS
| Bore Diameter | 1.9375 in |
|---|---|
| Bolt Center-To-Center Length | 6-1/4 in |
| Overall Length | 8.375 in |
| Base Width | 2-1/16 in |
| In | expansion type Non-Expansion Bearing (Fixed) |
| Lbf | housing construction Solid Pillow Block |
| 2 | in maximum rpm |
| 2150 | RPM duty type |
