US MOTORS (NIDEC) H32P2D
US MOTORS (NIDEC)
US MOTORS (NIDEC) H32P2D
H32P2D PART NUMBER
Severe Duty Motor - 3 ph Phase, 1-1/2 hp, 1800 rpm, 208-230/460 V, 145T Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 50/60 Hz
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) H32P2D
Class F insulation, Class B rise at full load on 60 Hz sine wave power
All cast iron construction (steel frame and fan cover on 140 frame)
Corrosion-resistant mill and chemical-duty paint
Stainless steel nameplate (with CE mark) and zinc plated hardware
Shaft slinger on pulley end for IP54 protection
40°C ambient, NEMA® Design B performance on 60 Hz sine wave power
Regreasable bearings (180 frame and up), lifting provisions (180 frame and up)
Double shielded bearings (140€“360), open on (400€“440)
Oversized conduit box: One size larger than NEMA standard
Cast iron inner bearing caps (180 frame and larger)
Field convertible to F2 mounting (180 frame and larger)
Condensation drains with plastic plugs
Applications For pulp and paper, mill and chemical and any other severe-duty environments found in the process industries
SPECIFICATIONS
| Motor Category | General Severe Duty Motor |
|---|---|
| Bearing Type | 6205-2Z-J/C3 |
| Motor Phase | 3 ph |
| Nema Design Class | B |
| Motor Horsepower | 1-1/2 , 1.50 hp |
| Service Factor | 1.15 |
| Synchronous Rpm | 1800 rpm |
| Frame Material | Steel |
| Motor Supply Voltage | 208-230/460 V |
| Insulation Class | F |
| Frame Size | 145T |
| Ip Rating | 54 |
| Enclosure Type | TEFC (Totally Enclosed Fan Cooled) |
| Standards Met | CE, NEMA |
| Frequency Rating | 50/60 Hz |
| Harmonization Code | 8501.52.4000 |
| Duty / Condition Type | Hostile Duty |
| Weight | 52.05 lbs |
| Mounting Type | Footed / Horizontal |
| Applications | Mines, Waste Management Facilities, Saw Mills, Pulp & Paper Plants, Foundries, Chemical Plants |
| Full Load Current | 4.50?4.30 / 2.10 A |
| Full Load Efficiency | 0.865 |
| Motor Poles | 4-pole |
| Shaft Diameter | 0.88 in |
