US MOTORS (NIDEC) D10P1D
US MOTORS (NIDEC)
US MOTORS (NIDEC) D10P1D
D10P1D PART NUMBER
General Purpose Motor - 3 ph, 10 hp, 3600 rpm, 208-230/460 V, 213T Frame, ODP (Open Drip-Proof) Enclosure, 50/60 Hz, Footed / Horizontal Mount
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) D10P1D
World Motor® features except where noted
Class F insulation, Class B rise at service factor
Rolled steel frame 56–320, cast iron frame 360–440
Aluminum end shields 56–250, cast iron end shields 280440
“CE” mark on nameplate (140 frame and larger)
40°C ambient, NEMA® Design B Performance on 60 Hz sine wave power
1.15 service factor
Regreasable bearings 180 frame and up
Double shielded bearings 140–400, open on 440
Bearing caps on 400 and 440 frames
F1 assembly position except where noted
Lifting provisions 210 frame and up
Applications: For use in pumps, fans, compressors, material handling and other general-purpose applications where contaminants are minimal
SPECIFICATIONS
| Motor Phase | 3 ph |
|---|---|
| Shaft Diameter | 1.38 in |
| Motor Horsepower | 10.0 , 10 hp |
| Nema Design Class | B |
| Synchronous Rpm | 3600 rpm |
| Frame Material | Steel |
| Motor Supply Voltage | 208-230/460 V |
| Insulation Class | F |
| Frame Size | 213T |
| Standards Met | CE, NEMA |
| Enclosure Type | ODP (Open Drip-Proof) |
| Weight | 90 lbs |
| Frequency Rating | 50/60 Hz |
| Applications | Pumps, Compressors, Fans, Material Handling |
| Mounting Type | Footed / Horizontal |
| Harmonization Code | 8501.52.4000 |
| Duty / Condition Type | Continuous Duty |
| Full Load Current | 27.10?24.30 / 12.20 A |
| Full Load Efficiency | 0.902 |
| Motor Poles | 2-pole |
