US MOTORS (NIDEC) DJ2E1DM
US MOTORS (NIDEC)
US MOTORS (NIDEC) DJ2E1DM
DJ2E1DM PART NUMBER
Close Coupled Pump Motor - 3 ph, 2 hp, 3600 rpm, 208-230/460 V, 145JM Frame, ODP (Open Drip-Proof) Enclosure, 50/60 Hz
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) DJ2E1DM
Class F insulation, Class B rise at service factor
Rolled steel frame
Aluminum end shields (140–250), cast iron end shields (280–320)
Oversized ball bearings w / locked shaft end construction
Premasked Mylar™ nameplate (with CE mark)
F1 assembly position
Regreasable bearings (180 frame and up), lifting provisions (210 frame and up)
Double shielded bearings
40°C ambient, NEMA® Design B Performance on 60 hertz sine wave power
JM shaft for mechanical seal
Epact Efficiency
Full 50 and 60 Hz operating data on nameplate (03)
Applications: For the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft. Used where dirt and moisture are minimal
SPECIFICATIONS
| Motor Category | Close Coupled Pump Motor |
|---|---|
| Full Load Efficiency | 0.84 |
| Motor Phase | 3 ph |
| Motor Poles | 2-pole |
| Motor Horsepower | 2.00 , 2 hp |
| Standards Met | CE, NEMA |
| Synchronous Rpm | 3600 rpm |
| Shaft Diameter | 0.88 in |
| Motor Supply Voltage | 208-230/460 V |
| Nema Design Class | B |
| Frame Size | 145JM |
| Frame Material | Steel |
| Enclosure Type | ODP (Open Drip-Proof) |
| Insulation Class | F |
| Frequency Rating | 50/60 Hz |
| Harmonization Code | 8501.52.4000 |
| Mounting Type | Footed / Horizontal |
| Weight | 37.44 lbs |
| Duty / Condition Type | Continuous Duty |
| Applications | For the Specific Requirements of Centrifugal Pumps Where the Pump Impeller is Mounted Directly on the Motor Shaft. Used Where Dirt and Moisture are Minimal |
| Full Load Current | 5.60?5.10 / 2.50 A |
