SMC C95SDG80-250-XC18
SMC
SMC C95SDG80-250-XC18
C95SDG80-250-XC18 PART NUMBER
C95SDG80-250-XC18 CYLINDER
MFR
C95S Tie Rod Air Cylinder - 80 mm Bore, 250 mm Stroke, 25 mm Rod, M20x1.5 Male Thread, Single Rod, Flange (Rear), MF2 Mount, Air Cushion Both Ends, 3/8 BSPP Ports
QTY QUOTESMC - SMC C95SDG80-250-XC18
Conforms to ISO 6431, CETOP RP43P, VDMA 24562
Large bore size (125~250mm)
Standard strokes up to 2400mm (depending on bore size)
Stainless steel rod
Auto switch capable
SPECIFICATIONS
| Cylinder Type | Metric |
|---|---|
| Operating Pressure Range | 7 to 145 psi |
| Rod Type | Single Rod |
| Push Force At 100 Psi | 3519 N |
| Bore Diameter | 80 mm |
| Pull Force At 100 Psi | 3175 N |
| Stroke Length | 250 mm |
| Standards Met | ISO 6431, CETOP RP43P, VDMA 24562 |
| Mounting Type | Flange (Rear), MF2 |
| Overall Width | 153 mm |
| Rod Gender | Male |
| Overall Height | 100 mm |
| Rod - Thread Size | M20x1.5 Male Thread |
| Lube Style | Non-lube |
| Port Size | 3/8 BSPP |
| Seal Kit | CS95-80 |
| Cushion Type | Air Cushion Both Ends |
| Rod Clevis | GKM20-40 Steel |
| Series | C95S |
| Rod Nut | NT-08 |
| Options Included | Magnetic Piston, Switch Ready, XC18 - NPT Finish Piping Port |
| Angled Pivot Bracket - Plain | E5080 |
| Locking Position | Without Locks |
| Angled Pivot Bracket - Ball Joint | ES5080 |
| Operating Temperature Range | 14 to 140°F |
| Flange Mount - Mf1/Mf2 | F5080 |
| Port Gender | Female |
| Clevis Mount (Detachable) - Mp2 | D5080, DS5080 (For ES Accessory) |
| Port Thread Standard | BSPP |
| Sperical Rod Eye | KJ20D Female Thread |
| Piston Action | Double-Acting |
| Eye Mount - Mp4 (Plain) | C5080 |
| Rod Size | 25 mm |
| Eye Mount - Mp6 (Ball Joint) | CR5080 |
| Rod Thread Standard | ISO |
| Foot Mounts - Ms1 | L5080 |
| Maximum Operating Pressure | 145 psi |
| Alignment Coupler / Floating Joint | JAH50-20-150 |
| Minimum Operating Pressure | 7 psi |
| Proof Pressure | 218 psi |
