MORSE 175UH60 100
MORSE
MORSE 175UH60 100
175UH60 100 PART NUMBER
XD1160
MFR
XD1160 Right Angle Worm Gear Speed Reducer - Single Reduction, 60:1 Ratio, 1.75 in Center Distance, Solid Shaft, 0.6250 in Input Size, Double Output Output
QTY QUOTEMORSE - MORSE 175UH60 100
Rugged Cast-Iron Housing: Provides maximum strength and dependability
High lead angle worm is case hardened, ground and polished
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds Tapered roller bearings are used on output shaft
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear
SPECIFICATIONS
| Reduction | Single |
|---|---|
| Housing Material | Cast Iron |
| Center Distance | 1.75 in |
| Overhung Load Capacity | 1200 lb |
| Maximum Input Horsepower | 0.450 @ 1750 rpm_x000D_ hp |
| Standard Base Kit | XD9000 |
| Vertical Low Base Kit | XD9002 |
| Output Direction | Double Output |
| Vertical High Base Kit | XD9003 |
| Manufacturer Reducer Size | 175 |
| Vertical J Base Kit | XD9004 |
| Input Type | Solid Shaft |
| Hollow Output Flange Kit | XD9001 |
| Input Size | 0.625 in |
| Torque Arm Kit | XD9005 |
| Output Type | Solid Shaft |
| Output Size | 1 in |
| Cad Drawing | https://www.3dcontentcentral.com/PremiumSSS-Download-Model.aspx?catalogId=12261&id=20853 |
| Maximum Output Torque | 29.1 in-lbs @1750 rpm input |
| Manufacturer Upc Number | 662000000000 |
