MARTIN SPROCKET & GEAR 35BS21HT 1
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 35BS21HT 1
35BS21HT 1 PART NUMBER
SABER Finished Bore Sprocket - 35 / 3/8 in, Bored to Size, 1.0000 in Bore , 21 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 35BS21HT 1
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 21 |
|---|---|
| Hub Diameter | 2 in |
| Bore Diameter | 1 in |
| Hub Outside Diameter | 2 in |
| Length Through Bore | 0.875 in |
| Hub Projection | 0.7031 in |
| Maximum Bore Diameter | 1.375 in |
| Number Of Set Screws | 2 |
| Outside Diameter | 2.713 in |
| Set Screw Size | .313-18 X .313 in |
| Chain Number & Pitch | 35 / 3/8 in |
| Set Screw Location | (1) over Keyway and (1) @ 90° |
| Bore Type | Bored to Size |
| Keyway Size | 1/2 x 1/4 in |
| Number Of Strands Across | 1 |
| Stocked Finished Bore | 1 in |
| Material | Steel |
| Storage Dimension Height | 0.9375 in |
| Number Of Hubs | 1 |
| Storage Dimension Length | 2.875 in |
| Pitch Type | Single |
| Storage Dimension Width | 2.875 in |
| Pitch Diameter | 2.5161 in |
| Weight | 0.55 lbs |
| Caliper Diameter | 2.3091 in |
| Manufacturer Upc Number | 697950159317 |
| Tooth Width | 0.168 in |
| Hardened Teeth | With Hardened Teeth |
