MARTIN SPROCKET & GEAR 35BS9HT 3/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 35BS9HT 3/8
35BS9HT 3/8 PART NUMBER
SABER Finished Bore Sprocket - 35 / 3/8 in, Bored to Size, 0.3750 in Bore , 9 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 35BS9HT 3/8
These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws-keyed on centerline of tooth
Enhanced depth and location of heat treatment increases life of part.
SPECIFICATIONS
| Number Of Teeth | 9 |
|---|---|
| Hardened Teeth | With Hardened Teeth |
| Bore Diameter | 0.375 in |
| Hub Diameter | 0.8438 in |
| Length Through Bore | 0.75 in |
| Hub Outside Diameter | 0.8438 in |
| Maximum Bore Diameter | 0.375 in |
| Hub Projection | 0.5781 in |
| Outside Diameter | 1.255 in |
| Number Of Set Screws | 2 |
| Chain Number & Pitch | 35 / 3/8 in |
| Set Screw Size | #10-24 X .188 in |
| Bore Type | Bored to Size |
| Set Screw Location | @ 90° |
| Number Of Strands Across | 1 |
| Stocked Finished Bore | 3/8 in |
| Material | Steel |
| Storage Dimension Height | 0.8125 in |
| Number Of Hubs | 1 |
| Storage Dimension Length | 2.3125 in |
| Pitch Type | Single |
| Storage Dimension Width | 2.3125 in |
| Pitch Diameter | 1.0964 in |
| Weight | 0.35 lbs |
| Caliper Diameter | 0.8797 in |
| Manufacturer Upc Number | 697950159553 |
| Tooth Width | 0.168 in |
