MARTIN SPROCKET & GEAR D80BS18HW 1 3/4
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR D80BS18HW 1 3/4
D80BS18HW 1 3/4 PART NUMBER
Bored to Size Sprocket - 80 / 1 in, Bored to Size, 1.7500 in Bore , 18 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR D80BS18HW 1 3/4
These finished bore sprockets are shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws… keyed on centerline of tooth
SPECIFICATIONS
| Number Of Teeth | 18 |
|---|---|
| Tooth Width | 0.557 in |
| Bore Diameter | 1.75 in |
| Width Across Tooth Sets | 1.71 in |
| Length Through Bore | 2.75 in |
| Hardened Teeth | Hardened Teeth |
| Outside Diameter | 6.271 in |
| Hub Diameter | 4-1/4 in |
| Chain / Sprocket Type | Standard Roller Chain |
| Keyway Size | 3/8 x 3/16 in |
| Chain Number & Pitch | 80 / 1 in |
| Storage Dimension Height | 2.75 in |
| Bore Type | Bored to Size |
| Storage Dimension Length | 6.271 in |
| Number Of Strands Across | 2 |
| Storage Dimension Width | 6.271 in |
| Material | Steel |
| Surface Treatment | Protective Coating |
| Number Of Hubs | 1 |
| Weight | 12.297 lbs |
| Pitch Type | Single |
| Manufacturer Upc Number | 697950059976 |
| Pitch Diameter | 5.7588 in |
| Caliper Diameter | 5.1338 in |
