MARTIN SPROCKET & GEAR 60BS10 5/8
MARTIN SPROCKET & GEAR
MARTIN SPROCKET & GEAR 60BS10 5/8
60BS10 5/8 PART NUMBER
Bored to Size Sprocket - 60 / 3/4 in, Bored to Size, 0.6250 in Bore , 10 Teeth, Steel Material
QTY QUOTEMARTIN SPROCKET & GEAR - MARTIN SPROCKET & GEAR 60BS10 5/8
These finished bore sprockets are shaft ready and come complete with keyways and setscrews.
The keyways are on center line of the tooth.
Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
Tolerances meet or exceed ANSI standards
Manufactured of high carbon steel
Precise machining and processes ensure consistent finish and high quality
Bores are concentric to pitch line, minimizing run out
2 set screws… keyed on centerline of tooth
SPECIFICATIONS
| Number Of Teeth | 10 |
|---|---|
| Caliper Diameter | 1.9581 in |
| Bore Diameter | 0.625 in |
| Tooth Width | 0.459 in |
| Length Through Bore | 1.25 in |
| Hardened Teeth | Non-Hardened Teeth |
| Outside Diameter | 2.758 in |
| Keyway Size | 1/4 x 1/8 in |
| Chain / Sprocket Type | Standard Roller Chain |
| Storage Dimension Height | 1.25 in |
| Chain Number & Pitch | 60 / 3/4 in |
| Storage Dimension Length | 2.758 in |
| Bore Type | Bored to Size |
| Storage Dimension Width | 2.758 in |
| Number Of Strands Across | 1 |
| Surface Treatment | Protective Coating |
| Material | Steel |
| Weight | 0.961 lbs |
| Number Of Hubs | 1 |
| Manufacturer Upc Number | 697950748368 |
| Pitch Type | Single |
| Pitch Diameter | 2.4271 in |
