NEXEN 964911
NEXEN
NEXEN 964911
964911 PART NUMBER
EMB 130-24 Flange Mounted Brake - Spring/Air, 24 mm Bore Size, 10000 rpm Max, 1/8 BSPT Port Size, Black Acrylic Paint Finish
QTY QUOTENEXEN - NEXEN 964911
The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors
This power off brake is ideal for use in cycling, emergency stopping and holding applications
Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications
Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes
SPECIFICATIONS
| Engagement/Release | Spring/Air |
|---|---|
| Brake Facing Effective Area | 72 cm² |
| Frame Size | 90S, 90L |
| Maximum Brake Continuous Thermal Dissipation | 0.22 kW |
| Bore Size | 24 mm |
| Brake Heat Sink Capacity | 94400 Joule |
| Maximum Rpm | 10000 rpm |
| Brake Peak Thermal Input Rate | 695 kW |
| Port Size | 1/8 BSPT |
| Maximum Pressure | 6.9 bar |
| Finish | Black Acrylic Paint |
| Minimum Release Pressure | 5.5 bar |
| Brake Series | EMB Series |
| Brake Air Chamber Volume When New | 0.437 in³ |
| Minimum Static Brake Torque | 45 N-m |
| Brake Air Chamber Volume When Worn Out | 0.025 in³ |
| Function | Stopping and Holding |
| Recommended Control Kits | 940012 (3-WAY N.C. 1/8 , 940017 (3 WAY N.C. 0-100 PSI 1/8 , 940021 (3 WAY 5-100 PSI 1/8 NPT) |
| Mounting Configuration | Flange Mounted |
| Additional Details | Not recommended for cyclic dynamic braking. Recommended for holding and estop applications. |
| Frame Type | IEC |
| Manufacturer Product Page | http://www.nexengroup.com/nxn/products/details/id/964911 |
| Bore Type | Straight |
| Shaft Inertia | 14.00 kg/cm² |
| Open Or Enclosed Design | Enclosed |
| Ratings | CE, and RoHS |
| Manufacturer Replacement Parts List | http://www.nexengroup.com/nxn/newin/index/parts-list/id/964911 |
| Approximate Brake Facing Life | 41 kW/hr |
