NEXEN 913020
SPECIFICATIONS
| Clutch Type | Tooth Clutch |
|---|---|
| Pilot Diameter | 3.5 in |
| Mounting Configuration | Shaft Mounted |
| Pilot Or Drive Flange Bolt Circle Data | 4, 0.250-20 Holes @ 90° on a 4.250 inch B.C. and 6, 0.312-18 Holes @ 90° on a 4.250 inch B.C. |
| Clutch Category | Tooth Clutch |
| Clutch Response Factor | 0.087 |
| Engagement/Release | Air Engaged/Spring Release |
| Maximum Pressure | 80 psi |
| Design | Enclosed |
| Minimum Engagement Pressure | 20 psi |
| Bore Type | Finished w/ Keyway & 2 SS |
| Air Chamber Volume | 0.639 in³ |
| Drive Arrangement | Pilot Mount |
| Ratings | NEMA MG1-2006 1.26.6 (Waterproof Machines), IP55, CE and RoHS |
| Port Size | 1/8 NPT |
| Model | 5H40P-E |
| Max Rpm | 1350 rpm |
| Weight | 19.81 lbs |
| Finish | Nickel Plated |
| Harmonization Code | 8483.60.4000 |
| Minimum Static Torque Capacity | 910 in-lbs |
| Additional Details | Air Engaged, Straight Bore, Pilot Mount, Enclosed, Tooth Clutch. Water protection/NEMA standard 1.26.5 (IP54). Instantaneous Torque up to 12,000 in-lbs. @ 80 psi. Maximum Operating Speed up to1,650 rpm. Six bore sizes ranging from 0.875 to 1.938 inches. Positive engagements in random positions. Use Single & Double Flexible Couplings for in-line applications to accommodate misalignment, 6 Models offer design flexibility. Sealed, radial ball bearings. Pilot Mount design with tapped mounting holes. Thru-shaft mounting design uses a full-length keyway. Ability to mount a pulley, sprocket or gear on the clutch. 8.25 inch hose included. Consult Nexen for use in cyclic applications or engagement at differential speeds. |
| Function | Connect/Disconnect, Shaft Timing, Holding |
| Manufacturer Product Page | http://www.nexengroup.com/nxn/default/products/details/id/913020 |
| Minimum Sprocket Size | 35/45T, 40/34T, 50/28T, 60/24T, 80/18T |
| Manufacturer Replacement Parts List | http://www.nexengroup.com/nxn/newin/index/parts-list/id/913020 |
| Number Of Engagement Positions | 122 |
| Drive Inertia | 14.89 lb-in² |
| Backlash | 0.30° |
| Bore Size | 1.25 in |
| Shaft Inertia | 4.89 lb/in² |
